Usage: op-reth prune [OPTIONS]
Options:
-h, --help
Print help (see a summary with '-h')
Datadir:
--datadir <DATA_DIR>
The path to the data dir for all reth files and subdirectories.
Defaults to the OS-specific data directory:
- Linux: `$XDG_DATA_HOME/reth/` or `$HOME/.local/share/reth/`
- Windows: `{FOLDERID_RoamingAppData}/reth/`
- macOS: `$HOME/Library/Application Support/reth/`
[default: default]
--datadir.static-files <PATH>
The absolute path to store static files in.
--datadir.rocksdb <PATH>
The absolute path to store `RocksDB` database in.
--datadir.pprof-dumps <PATH>
The absolute path to store pprof dumps in.
--config <FILE>
The path to the configuration file to use
--chain <CHAIN_OR_PATH>
The chain this node is running.
Possible values are either a built-in chain or the path to a chain specification file.
Built-in chains:
optimism, optimism_sepolia, optimism-sepolia, base, base_sepolia, base-sepolia, arena-z, arena-z-sepolia, automata, base-devnet-0-sepolia-dev-0, bob, boba-sepolia, boba, camp-sepolia, celo, creator-chain-testnet-sepolia, cyber, cyber-sepolia, ethernity, ethernity-sepolia, fraxtal, funki, funki-sepolia, hashkeychain, ink, ink-sepolia, lisk, lisk-sepolia, lyra, metal, metal-sepolia, mint, mode, mode-sepolia, oplabs-devnet-0-sepolia-dev-0, orderly, ozean-sepolia, pivotal-sepolia, polynomial, race, race-sepolia, radius_testnet-sepolia, redstone, rehearsal-0-bn-0-rehearsal-0-bn, rehearsal-0-bn-1-rehearsal-0-bn, settlus-mainnet, settlus-sepolia-sepolia, shape, shape-sepolia, silent-data-mainnet, snax, soneium, soneium-minato-sepolia, sseed, swan, swell, tbn, tbn-sepolia, unichain, unichain-sepolia, worldchain, worldchain-sepolia, xterio-eth, zora, zora-sepolia, dev
[default: optimism]
Database:
--db.log-level <LOG_LEVEL>
Database logging level. Levels higher than "notice" require a debug build
Possible values:
- fatal: Enables logging for critical conditions, i.e. assertion failures
- error: Enables logging for error conditions
- warn: Enables logging for warning conditions
- notice: Enables logging for normal but significant condition
- verbose: Enables logging for verbose informational
- debug: Enables logging for debug-level messages
- trace: Enables logging for trace debug-level messages
- extra: Enables logging for extra debug-level messages
--db.exclusive <EXCLUSIVE>
Open environment in exclusive/monopolistic mode. Makes it possible to open a database on an NFS volume
[possible values: true, false]
--db.max-size <MAX_SIZE>
Maximum database size (e.g., 4TB, 8TB).
This sets the "map size" of the database. If the database grows beyond this limit, the node will stop with an "environment map size limit reached" error.
The default value is 8TB.
--db.page-size <PAGE_SIZE>
Database page size (e.g., 4KB, 8KB, 16KB).
Specifies the page size used by the MDBX database.
The page size determines the maximum database size. MDBX supports up to 2^31 pages, so with the default 4KB page size, the maximum database size is 8TB. To allow larger databases, increase this value to 8KB or higher.
WARNING: This setting is only configurable at database creation; changing it later requires re-syncing.
--db.growth-step <GROWTH_STEP>
Database growth step (e.g., 4GB, 4KB)
--db.read-transaction-timeout <READ_TRANSACTION_TIMEOUT>
Read transaction timeout in seconds, 0 means no timeout
--db.max-readers <MAX_READERS>
Maximum number of readers allowed to access the database concurrently
--db.sync-mode <SYNC_MODE>
Controls how aggressively the database synchronizes data to disk
Static Files:
--static-files.blocks-per-file.headers <BLOCKS_PER_FILE_HEADERS>
Number of blocks per file for the headers segment
--static-files.blocks-per-file.transactions <BLOCKS_PER_FILE_TRANSACTIONS>
Number of blocks per file for the transactions segment
--static-files.blocks-per-file.receipts <BLOCKS_PER_FILE_RECEIPTS>
Number of blocks per file for the receipts segment
--static-files.blocks-per-file.transaction-senders <BLOCKS_PER_FILE_TRANSACTION_SENDERS>
Number of blocks per file for the transaction senders segment
--static-files.blocks-per-file.account-change-sets <BLOCKS_PER_FILE_ACCOUNT_CHANGE_SETS>
Number of blocks per file for the account changesets segment
--static-files.blocks-per-file.storage-change-sets <BLOCKS_PER_FILE_STORAGE_CHANGE_SETS>
Number of blocks per file for the storage changesets segment
--static-files.receipts <RECEIPTS>
Store receipts in static files instead of the database.
When enabled, receipts will be written to static files on disk instead of the database.
Note: This setting can only be configured at genesis initialization. Once the node has been initialized, changing this flag requires re-syncing from scratch.
[default: false]
[possible values: true, false]
--static-files.transaction-senders <TRANSACTION_SENDERS>
Store transaction senders in static files instead of the database.
When enabled, transaction senders will be written to static files on disk instead of the database.
Note: This setting can only be configured at genesis initialization. Once the node has been initialized, changing this flag requires re-syncing from scratch.
[default: false]
[possible values: true, false]
--static-files.account-change-sets <ACCOUNT_CHANGESETS>
Store account changesets in static files.
When enabled, account changesets will be written to static files on disk instead of the database.
Note: This setting can only be configured at genesis initialization. Once the node has been initialized, changing this flag requires re-syncing from scratch.
[default: false]
[possible values: true, false]
--static-files.storage-change-sets <STORAGE_CHANGESETS>
Store storage changesets in static files.
When enabled, storage changesets will be written to static files on disk instead of the database.
Note: This setting can only be configured at genesis initialization. Once the node has been initialized, changing this flag requires re-syncing from scratch.
[default: false]
[possible values: true, false]
RocksDB:
--rocksdb.all
Route all supported tables to `RocksDB` instead of MDBX.
This enables `RocksDB` for `tx-hash`, `storages-history`, and `account-history` tables. Cannot be combined with individual flags set to false.
--rocksdb.tx-hash <TX_HASH>
Route tx hash -> number table to `RocksDB` instead of MDBX.
This is a genesis-initialization-only flag: changing it after genesis requires a re-sync. Defaults to `true` when the `edge` feature is enabled, `false` otherwise.
[default: false]
[possible values: true, false]
--rocksdb.storages-history <STORAGES_HISTORY>
Route storages history tables to `RocksDB` instead of MDBX.
This is a genesis-initialization-only flag: changing it after genesis requires a re-sync. Defaults to `true` when the `edge` feature is enabled, `false` otherwise.
[default: false]
[possible values: true, false]
--rocksdb.account-history <ACCOUNT_HISTORY>
Route account history tables to `RocksDB` instead of MDBX.
This is a genesis-initialization-only flag: changing it after genesis requires a re-sync. Defaults to `true` when the `edge` feature is enabled, `false` otherwise.
[default: false]
[possible values: true, false]
Logging:
--log.stdout.format <FORMAT>
The format to use for logs written to stdout
Possible values:
- json: Represents JSON formatting for logs. This format outputs log records as JSON objects, making it suitable for structured logging
- log-fmt: Represents logfmt (key=value) formatting for logs. This format is concise and human-readable, typically used in command-line applications
- terminal: Represents terminal-friendly formatting for logs
[default: terminal]
--log.stdout.filter <FILTER>
The filter to use for logs written to stdout
[default: ]
--log.file.format <FORMAT>
The format to use for logs written to the log file
Possible values:
- json: Represents JSON formatting for logs. This format outputs log records as JSON objects, making it suitable for structured logging
- log-fmt: Represents logfmt (key=value) formatting for logs. This format is concise and human-readable, typically used in command-line applications
- terminal: Represents terminal-friendly formatting for logs
[default: terminal]
--log.file.filter <FILTER>
The filter to use for logs written to the log file
[default: debug]
--log.file.directory <PATH>
The path to put log files in
[default: <CACHE_DIR>/logs]
--log.file.name <NAME>
The prefix name of the log files
[default: reth.log]
--log.file.max-size <SIZE>
The maximum size (in MB) of one log file
[default: 200]
--log.file.max-files <COUNT>
The maximum amount of log files that will be stored. If set to 0, background file logging is disabled
[default: 5]
--log.journald
Write logs to journald
--log.journald.filter <FILTER>
The filter to use for logs written to journald
[default: error]
--color <COLOR>
Sets whether or not the formatter emits ANSI terminal escape codes for colors and other text formatting
Possible values:
- always: Colors on
- auto: Auto-detect
- never: Colors off
[default: always]
--logs-otlp[=<URL>]
Enable `Opentelemetry` logs export to an OTLP endpoint.
If no value provided, defaults based on protocol: - HTTP: `http://localhost:4318/v1/logs` - gRPC: `http://localhost:4317`
Example: --logs-otlp=http://collector:4318/v1/logs
[env: OTEL_EXPORTER_OTLP_LOGS_ENDPOINT=]
--logs-otlp.filter <FILTER>
Set a filter directive for the OTLP logs exporter. This controls the verbosity of logs sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
Example: --logs-otlp.filter=info,reth=debug
Defaults to INFO if not specified.
[default: info]
Display:
-v, --verbosity...
Set the minimum log level.
-v Errors
-vv Warnings
-vvv Info
-vvvv Debug
-vvvvv Traces (warning: very verbose!)
-q, --quiet
Silence all log output
Tracing:
--tracing-otlp[=<URL>]
Enable `Opentelemetry` tracing export to an OTLP endpoint.
If no value provided, defaults based on protocol: - HTTP: `http://localhost:4318/v1/traces` - gRPC: `http://localhost:4317`
Example: --tracing-otlp=http://collector:4318/v1/traces
[env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
--tracing-otlp-protocol <PROTOCOL>
OTLP transport protocol to use for exporting traces and logs.
- `http`: expects endpoint path to end with `/v1/traces` or `/v1/logs` - `grpc`: expects endpoint without a path
Defaults to HTTP if not specified.
Possible values:
- http: HTTP/Protobuf transport, port 4318, requires `/v1/traces` path
- grpc: gRPC transport, port 4317
[env: OTEL_EXPORTER_OTLP_PROTOCOL=]
[default: http]
--tracing-otlp.filter <FILTER>
Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
Defaults to TRACE if not specified.
[default: debug]
--tracing-otlp.sample-ratio <RATIO>
Trace sampling ratio to control the percentage of traces to export.
Valid range: 0.0 to 1.0 - 1.0, default: Sample all traces - 0.01: Sample 1% of traces - 0.0: Disable sampling
Example: --tracing-otlp.sample-ratio=0.0.
[env: OTEL_TRACES_SAMPLER_ARG=]
